SearchSearch   ProfileProfile   Log inLog in   RegisterRegister 

Centralized Topology 3 difficulty set up. Please help. Any

 
Post new topic   Reply to topic    FirstSpot Forum Index -> Pre-sales Support Forum
View previous topic :: View next topic  
Author Message
xnp



Joined: 02 Jun 2004
Posts: 20
Location: Los Angeles

PostPosted: Wed Dec 22, 2004 5:49 am    
Post subject: Centralized Topology 3 difficulty set up. Please help. Any

Anyone using the same topology and are successful with the set up?

I am having difficulty setting up topology 3 on final release v3. I am using:

-Linksys WRV54G wireless broadband VPN router for the remote locations.
-Linksys RV082 VPN 8-port router for the central location (central location)
-Windows 2000 Server
-MSSQL 2000

I want to create a VPN tunnel between the central location and the remote location with two VPN devices. I don't know how to set it up.

I am not understanding how to set up the multiple network segment for the remote locations.

a) Do I use the remote IP address in place of the router IP or the IP address of the WRV54G?
b) What do I put for the Gateway address?

From the Linksys RV082 (central location VPN router):

a) Do I disable the DHCP?
b) Do I connect the internet directly to it?


From the FirstSpot server

a) Public NIC: Do I connect the internet directly to it or do I connect it from the Linksys RV082?
b) Private NIC: What do I connect it to?
-----------------

If a client from a remote location connects to WRV54G and routes it to FirstSpot (central) to authenticate and then back to the client device, does it do this?

a) client device===WRV54G (remote AP/VPN router)===internet (VPN)===RV082 (8-port VPN router)===FirstSpot/ODBC (central server) = // authenticate client user// = RV082 (8-port VPN router)===internet (VPN)===WRV54G (remote AP/VPN router)===client device

if so... how do I set it up? Thank you in advance.
Back to top
fredetienne



Joined: 23 Dec 2004
Posts: 1
Location: France

PostPosted: Thu Dec 23, 2004 3:44 pm    
Post subject: reply ???

i have the same problem, did'you obtain a reply ?? Positive or negative??
Back to top
xnp



Joined: 02 Jun 2004
Posts: 20
Location: Los Angeles

PostPosted: Fri Dec 24, 2004 2:00 am    
Post subject: no reply

no, not a reply yet.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    FirstSpot Forum Index -> Pre-sales Support Forum All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group