Not Redirecting

[jjoaquin]

1. I got this error log in event viewer while manually starting remote

Event Type: Warning
Event Source: RemoteAccess
Event Category: None
Event ID: 20169
Date: 1/5/2005
Time: 5:32:54 PM
User: N/A
Computer: FLOTSAM
Description:
Unable to contact a DHCP server. The Automatic Private IP Address 169.254.121.38 will be assigned to dial-in clients. Clients may be unable to access resources on the network.

2. my config.ini


;
; Description : FirstSpot setting ini file
;
; Filename : config.ini
;
; Copyright (c) 2002-2004, PatronSoft Limited
;

; Note: use a backslash to separate directories and files, those lines starting with
; a semi-colon are considered as comments.
;
; Warning : please don't change this file without supervision of a PatronSoft Engineer
; It is highly recommended that you change the FirstSpot setting in the Web-based Configuration Manager

[version]
version=Trial
versionDesc=3.0.1

[MNS]
; number of return paths
num_return_path=0
return_path0=

[DHCP]
leasetime=2880
num_ignored_addr=6
ignore_addr0=10.20.7.5
ignore_addr1=10.20.7.6
ignore_addr2=10.20.7.7
ignore_addr3=10.20.7.8
ignore_addr4=10.20.7.9
ignore_addr5=10.20.7.10

[Client Pass]
num_mac_addr=0
mac_0=
num_ip_addr=0
ip_0=

;
; Redirect Login Page php file
;
[loginPhp]
Login_enable0=
Login_php_Num0=

;
; Gateway Settings
;
[gateway]
;demo_mode=on, off (default)
;
;This demo_mode parameter is for FirstSpot channel partners demonstration purpose
;If demo_mode=on, FirstSpot DNS Server and Web Server will perform a catch-all on all
;requests. After the user login, the client will always see the "firstspotdemo" page.
demo_mode=off

;redirect user to cart.php when login fails
redirect_cart=1

;Client Isolation, NetBIOS over TCP/IP, Default is Disabled
netbios=1

;Scenario 2 (Distributed Network Topology)
scenario2=0

; Post-Startup Batch File Path Name
batch_filePath =

; lan's subnet mask (please change this through Configuration Manager only)
;
subnet_mask =255.255.255.0

; domain name server IP address
;
DNS =0.0.0.0

; domain name server IP address
;
preferred_DNS =0.0.0.0

; domain name server IP address
;
alternate_DNS =0.0.0.0

; username
;
user =firstspot

; password
;
pass =a03af780c0f2959f26512a2cc8c2efb6

;Number of maximum administrator account
max_admin_account = 10

;Administrator username
admin_username0 =
admin_username1 =
admin_username2 =
admin_username3 =
admin_username4 =
admin_username5 =
admin_username6 =
admin_username7 =
admin_username8 =
admin_username9 =

;Administrator password
admin_password0 =
admin_password1 =
admin_password2 =
admin_password3 =
admin_password4 =
admin_password5 =
admin_password6 =
admin_password7 =
admin_password8 =
admin_password9 =

;Administrator parameter
admin_parameter0 =
admin_parameter1 =
admin_parameter2 =
admin_parameter3 =
admin_parameter4 =
admin_parameter5 =
admin_parameter6 =
admin_parameter7 =
admin_parameter8 =
admin_parameter9 =

; network interface card connected to Internet (after modify this, need to restart FirstSpot)
;
publicNIC=Local Area Connection

; network interface card connected Hotspots or visitor-based networks (after modify this, need to bind the FirstHop driver
; to this new card and unbind the FirstHop driver from ALL other cards, then reboot Windows)
;
privateNIC=Local Area Connection 2

; data source for user login
;
Datasource =C:\Program Files\FirstSpot\datasource\firstspot.dsn

; datasource table for user login
;
Datasource_Tablename = fsusr

; datasource table for user login
Datasource_Plans_Tablename = fsplans

; enable session logging into the datasource log table
session_log =ON

; datasource table for user session logging
;
Datasource_Log_Tablename = fsusrlog

; datasource table for PayPal
;
Datasource_PayPal_Table=ppal

; port used by Gateway Service
;
port =5786

; port used by Authentication Server
;
auth_port =5788

; port used by ssl site
;
ssl_port =5789

; Greeting message displayed in login page
;
greeting_msg =Welcome to our Hotspot!

; Enable to show InfoBox
;
show_infobox =ON

; Login page picture (filename)
;
loginpage_pic_name=autumn.jpg

; authentication server IP address (please change this through Configuration Manager only)
; Note: different from gateway_IP when it is not installed in gateway (not officially supported in this version)
;
auth_IP =10.20.7.1

; login page filename which dispatcher will call
;
loginpage =login_select.php

; login form filename which login_select.php will call
;
loginform =login_form.php

; anonymous login form filename which login_select.php will call
;
a_loginform =alogin_form.php

; authentication form filename which authentication.php will call
;
reauthenticationform =reauth_form.php

; anonymous authentication form filename which authentication.php will call
;
a_reauthenticationform =alogout_form.php

; idle time (minutes) allowed for authenticated users
;
idle_timeout =10

; private network (please change this through Configuration Manager only)
;
private_IP =10.20.7.0

; gateway IP address (please change this through Configuration Manager only)
;
gateway_IP =10.20.7.1

; allow access to config manager from private network?
;
access_from_private =off

; allow access to config manager from public network?
;
access_from_public =off

; license file path
;
licensepath =C:\Program Files\FirstSpot\

; session handling mode, 0 for MAC-based, 1 for IP-based
session_handling =0

; path for dhcp config
dhcppath =C:\Program Files\FirstSpot\dhcp\dhcpservice.ini

; dhcp mode, 0 = auto, 1 = static, 2 = disabled
dhcpmode =0

; for static dhcp only, path of the Ip MAC mapping list
static_dhcp_path =C:\Program Files\FirstSpot\StaticDHCP.txt

; anonymous login
anonymous_login =OFF

; secret enable
secret_enable=off

; secret code
secret_code=0aed120c6f7090a5b26a4c93df382b21

; anonymous login user table name
Datasource_Anonymous_Tablename =fsa

; anonymous login log table name
Datasource_Anonymous_Log_Tablename =fsalog

; password offloading mode
pwd_offload = off

; password encryption directory path
encrypt_path =C:\Program Files\FirstSpot\dispatcher\encrypt_pwd.exe

; initial air time in minutes for self signup users
self_sign_up_credit=0

; self signup filtering
self_signup_filter=1

;allow self-signup without an ip/mac, 0=yes, 1=no
self_signup_no_mac=1

; null=no filter, 0 = signup once, >0 after x mins
self_signup_period=

;use 3 party ssl cert 0=yes 1=no
ssl_cert=1

;secure socket layer for authentication
;443 for enabled SSL, auth_port=ssl_auth_port for disabled ssl
ssl_auth_port=5788

;rewrite engine for http to https redirection
rewrite_engine=off

;NAT
nat=0

;maximum fail attempt allowed
max_attempt=

; Allowed Hosts Settings
;
[allowed hosts]
; allowed hosts keywords file path
;
hosts_keywords_path =C:\Program Files\FirstSpot\AllowedHostsKeywords.txt

; allowed hosts IPs file path
;
hosts_ips_path =C:\Program Files\FirstSpot\AllowedHostsIps.txt


; Bandwidth Throttle Settings
[bw_throttle]
; Bandwidth Throttle Mode
bt_mode =0

; Overall Upload Limit (at least 20KB/s recommended)
bt_ul_limit =0

; Overall Download Limit (at least 20KB/s recommended)
bt_dl_limit =0

; low, medium and high definition
bt_low=100
bt_medium=50
bt_high=20
bt_drop_period=2

[bwreset]
bwresetmethod=
bwresetperiod=
lastresetbw=

[creditcard]
payment_method=ppal

[paypal]
; Business id
;
ppal_business=your_business_id@your_email.com

; URL for successful transactions
;
ppal_return=http://10.20.7.1:5788/cart.php

; URL for cancelled transactions
;
ppal_cancal_return=http://10.20.7.1:5788/cart.php

; trust "Pending"=="Complete"?
;
ppal_pending_release=no

; the settlement currency
;
ppal_base_currency=USD

; URL for notify
;
ppal_notify_url=http://fixed_ip:5789

; Starting number for invoice
;
ppal_invoice_start=1

[worldpay]
; Installation id
;
wpay_instID=your_installation_ID

; the settlement currency
;
wpay_base_currency=USD

; URL for notify
;
wpay_notify_url=http://fixed_ip:5789

; Test Mode
; 100 : test mode - always successful validation
; 101 : test mode - always failed validation
; 0 : test mode - live mode, not testing
;
wpay_testmode=0

[lang]
lang_pack_file=custom_lang.php
cmlang_pack_file=custom_cmlang.php
last_logout=logout
this_logout=logout
last_info=infobox
this_info=infobox
last_cart=cart
this_cart=cart
key_0=
url_0=
signup01=off
signup02=off
signup03=off
signup04=off
signup05=off
signup06=off
signup07=off
signup08=off
signup09=off
signup10=off

; Setting of cart description
[cart]
max_slot_open=0

[radius]
use_radius=false
ServerIP=10.20.7.1
AuthPort=1812
AccPort=1813
Secret=secret
FSVendorID=2004
Datasource=C:\Program Files\FirstSpot\datasource\radius.dsn
Datasource_Tablename=fsRadius
Acc_Start=true
Acc_Stop=true
;Acc_FSLogin=true
;Acc_FSLogout=true
;Acc_FSWriteLog=true

[radiusAuthentication]
NAS_IDENTIFIER=FirstSpot
;NAS_IP_ADDRESS=the private nic ip, this can be edited.
;CALLING_STATION_ID=client nic mac or ip, depends on the Firstspot setting, this can not be edited.
;CALLED_STATION_ID=firstspot private nic mac, this can not be edited.

[radiusCustomAttribute]
;Vendor spec type for Firstspot
;fixed value can not be changed.
;
;FS_AUTH_TIMELEFT=1
;FS_AUTH_ACCUMBW=2
;FS_AUTH_BWQUOTA=3
;FS_AUTH_BWCOUNT=4
;FS_AUTH_ULLIMIT=5
;FS_AUTH_DLLIMIT=6
;FS_AUTH_LOGINTIME=7
;FS_AUTH_LOGOUTTIME=8
;FS_AUTH_TIMEDIFF=9
;FS_AUTH_BWUSAGE=10

;Account Status Type Attributes, can be changed.
;
;default ACCT_STATUS_FSLOGIN=217
;default ACCT_STATUS_FSLOGOUT=218
;default ACCT_STATUS_FSWRITELOG=219

[misc]
show_cart=yes
enable_chgpwd=1
block_icmp=off
block_udp=on
_debug=1
oem=C:\WINNT\INF\oem19.inf
PublicAdapterIP=66.187.80.91
PublicAdapterIpMask=255.255.255.128
PrivateMAC=000347a62dca

[alan]

I am quite sure that your problem is in the Routing and Remote Access service. You have to fix that problem first before running FirstSpot.

If you cannot fix it, you might want to reinstall FirstSpot in a clean Windows PC.
_________________
~ Patronsoft Limited ~

[multinet]

I don't know if it's your problem but if your are running kerio personal firewall on the firstspot machine you *must* enable gateway mode on kerio to make redirection working fine.

[jjoaquin]

hi alan,

i tried re-installing my first spot machine and installed firstspot on it but still the same problem. the client machines after logging in just get the redirecting to the original url shortly page then gets an error saying the page cannot be displayed. Any other ideas.

Have not installed any firewall applications on my FS machine, if this might help tried internet connection sharing and clients can access the web successfully.

thanks for the support.

[alan]

Do you still have problem with Routing and Remote Access service? Reinstall FirstSpot in the same Windows machine probably won't solve the problem.

Also, FirstSpot is NOT compatible with internet connection sharing, you have to turn it off before starting FirstSpot. Refer to readme.rtf for more information.
_________________
~ Patronsoft Limited ~

[jjoaquin]

hi alan,

i dont know whats the problem with Routing and Remote Access Service on Win2K Pro. Could you give me some steps on troubleshooting it?

Anyways, I've tried installing Firstspot on the same machine this time with WinXP instead of Win2K OS and everything works well.

any ideas, about this any FS issues with regards to OS used. Temporarily we'll just be testing FS in WinXP OS but we prefer to install FS on a Win2K OS in it. Thanks for the support. Your comments are most welcome

[alan]

Routing and Remote Access Service (RRAS) on Win2K Pro should have no problems at all.

There are many reasons for RRAS to fail, sometimes due to service dependencies (you uninstall or stop something that RRAS depends on - e.g. Remote Registry). Sometimes it is just corrupted for unknown reason. Unless you have deep understanding on troubleshooting Windows, reinstall Windows is probably the fastest way to fix the problem sometimes.
_________________
~ Patronsoft Limited ~